Table of Contents
Advertisement
Button Sewing
Stitch selector:
5
Stitch width:
2 to 6.5
Stitch length:
Any
Needle thread tension:
2 to 6
(_) Presser foot A:
Zigzag foot
_) Feed dogs:
Dropped
_
WIDTH
[_@
LENGTH_@
-
I
Drop the feed dogs. Match the holes on a button with the
horizontal slot on the Presser foot [A]. Adjust stitch width
matching the distance of the holes on the button. Lower the
foot to hold the button in place. Check to see if the needle
enters into the holes on the button by turning the handwheel
by hand. Sew about ten (10) stitches.
To strengthen the shank, cut the threads leaving about
4.0"(10.0 cm). Bring the needle thread down through one of
the holes on the button and wind it around the shank. Bring
the needle thread to the wrong side (bottom side) and knot.
After button sewing is completed, raise the feed dogs for
normal sewing.
f
81
Hide quick links:
Advertisement
Table of Contents
