Stitch Pattern Selector Dial; Stitch Length Control Dial; Adjusting Stretch Stitch Balance; Reverse Stitch Control - Kenmore 385.19112 Owner's Manual

Stitch Pattern Selector Dial
Raise the needle and presser foot. Turn the pattern selector
dial to set the symbol correstponding to the desired pattern
at the setting mark.
_i_ Setting mark
Stitch Length Control Dial
Turn the stitch length control dial to set the desired stitch
length at the setting mark.
The higher the number, the longer the stitch length.
_i_ Setting mark
• "_===_" i s the recommended setting for buttonhole stitching.
• Adjust the dial in the 0.5-4 range when you sew the
zigzag stitch.
• Set the dial at "S.S." to sew the stretch stitch pattern.
Adjusting Stretch Stitch Balance
If the stretch stitch patterns are uneven when you sew on
a particular fabric, correct them by turning the stitch length
dial.
If the patterns are drawn out, correct them by setting the
dial to the "-" side.
If the patterns are compressed, correct them by setting the
dial to the "+" side.
Reverse Stitch Control
Press the stitch control to sew in reverse.
f
f
BH A B C D E F G
if
if
®/
0 1 2 3
I
I
I
S.S.
4
I
I
I
I
J
J
30