Pressure Adjusting Lever; Presser Foot Lifter; Thread Cutter; Extension Table - Kenmore 385.17626 Owner's Manual

Pressure Adjusting Lever
_/ Pressure adjusting lever
The pressure adjusting lever should be set at "3" for
regular sewing.
Reduce pressure to "2" for applique, cut work, draw
work and basting.
Set pressure at "1" when sewing chiffon, lace,
organdy and other fine fabrics. Velour and knits with
a lot of stretch may also require pressure at "1".
Presser Foot Lifter
Presser foot lifter
Normal up position
6} Highest position
The presser foot lifter raises and lowers your presser
foot.
You can raise it about 1/4"( 0.6 cm ) higher than the
normal up position for easy removal of the presser
foot or to help you place heavy fabric under the foot.
Thread Cutter
_ Thread cutter
You do not need a pair of scissors to cut threads
after sewing. Just use the built-in thread cutter,
f
\
\
ff
i-
iL
' \ "6)
"\@
\
\
/
/
J
Extension Table
Detaching the table :
Pull the table away from the machine, as illustrated,
Attaching the table:
Push the extension table until it snaps into the
machine.
Extension table
_2} Projection
_ Hole
Accessory Box :
Open the cover of the accessory box toward you.
Sewing accessories are conveniently located in the box.
f
8
\
\
/
/
/
/
J