Gas Adjustment (Conversion To Lpg) - Baumatic BHI909TS. GWK Instruction Manual

Gas adjustment (Conversion to LPG)

All
registered engineer.
IMPORTANT: Always isolate the hob from the electricity supply
before changing the injectors and/or adjusting the minimum
flow of the burners.
GAS TYPE PRESSURE
mbar
Natural 20
gas – G20
LPG – 28-30/37
G30/G31
o Reassemble all the burners carefully; in particular you should make
sure that the flame spreader is correctly placed on the burner.
o IMPORTANT: The minimum flow adjustment process must be
completed before the appliance is next used.
work must be
o Remove
flame spreaders (A).
o Unscrew the injector (B) and replace it with
the stipulated injector for the new gas
supply (see the table on the next page).
BURNER INJECTOR
1/100
Triple- 71A-95B
crown
Triple- 80A-143B
crown
38
carried out by
the pan-stands,
Ø THERMAL
CAPACITY
Nominal W
mm
4000
4000
a GASSAFE
burners and
CONSUMPTION
381 l/h
291 g/h