Table of Contents
Advertisement
o You must make sure that there is a 5 mm gap below the
underneath of the worktop at the front edge of the hob.
Unpacking the appliance
When unpacking the appliance please check that the following items
are contained within the packaging:
1 x Baumatic hob
Pan stand
Burner assemblies
Instruction manual
Warranty card
Fixing screws
Clamps
Sealing strip
LPG conversion jets
Self-adhesive label for amending the gas category on the appliance's
rating plate (required if the LPG conversion jets are used).
Installing the appliance
o Cut a hole in the worktop that corresponds with the drawing shown
above.
o Remove the protective covering from the sealing strip
31
Advertisement
Table of Contents
