Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Baumatic BHI900SS
Summary of Contents for Baumatic BHI900SS
- Page 1 BHI900SS 90cm Front touch control induction zone hob...
- Page 2 User Manual for your Baumatic BHI900SS 90 cm Touch control induction zone hob NOTE : This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference;...
-
Page 3: Table Of Contents
Contents Environmental note Important safety information 5 – 8 Specifications 9 – 11 Dimensions Product specifications 9 - 10 Electrical details Ceramic hob surface layout Control panel layout Using the ceramic hob 11 - 19 Before first use Touch controls Switching the hob on Switching on a zone and setting a power level Switching off a zone gradually... -
Page 4: Environmental Note
Environmental note o The packaging materials that Baumatic uses are environmentally friendly and can be recycled. o Please discard all packaging material with due regard for the environment. -
Page 5: Important Safety Information
You should not use this appliance to store items on or as a work surface. o No modifications to the appliance are permitted by Baumatic Ltd. o You should not store or place flammable or highly flammable liquids/materials on top of or near the appliance. Items made from aluminium, plastic or plastic film should also be kept away from the appliance, as they may fuse to the surface. - Page 6 Child Safety o Baumatic strongly recommend that babies and young children are prevented from being near to the appliance and not allowed to touch the appliance at any time. During and after use, all surfaces will be hot. o If it is necessary for younger family members to be in the kitchen, please ensure that they are kept under close supervision at all times.
- Page 7 If in doubt, you should consult the manufacturer of your device or your doctor. In this respect, Baumatic can only guarantee the conformity of our own product. o If an object made of metal, (e.g. saucepan lid, knife, fork or spoon) is placed on a cooking zone that is switched on, it can get hot.
- Page 8 Declaration of conformity This appliance complies with the following European Directives: -73/23/EEC dated 19/02/1973 Low Voltage Directive. -89/336/EEC dated 03/05/1989 Directive inclusive Amending Directive 92/31/EEC. -93/68/EEC dated 22/07/1993 CE Marking Directive. -89/109/EEC dated 25/01/1992 Materials that can touch food. o The manufacturer declares that the hob is built using certified materials requires appliance...
-
Page 9: Specifications
Specifications Product dimensions: Aperture dimensions: Depth: 510 mm Depth: 490 mm Width: 902 mm Width: 880 mm Height: 47 mm Product specifications: o 2.40 kW induction zone (Ø 280 mm) o 2.30 kW induction zone (Ø 210 mm) o 2 x 1.85 kW induction zones (Ø 180 mm) o 1.40 kW induction zone (Ø... -
Page 10: Ceramic Hob Surface Layout
Supply Connection: 50 A (double pole switched fused outlet with 3mm contact gap) Max Rated Inputs: 9.80 kW Mains Supply Lead: 3 core x 6 mm² (not supplied) For future reference please record the following information which can be found on the rating plate and the date of purchase which can be found on your sales invoice. -
Page 11: Control Panel Layout
Control panel layout 1) ON / OFF button 2) Cooking zone plus button 3) Cooking zone minus button 4) Timer button 5) Timer plus button 6) Timer minus button 7) Keep warm function button 8) Booster function button 9) Safety lock button 10) Pause button Using the ceramic hob Before first use... -
Page 12: Switching The Hob On
Switching the hob on o When the hob is connected to a power supply all of the cooking zone indicators will come on for 1 second and then go off. The hob has now entered stand-by mode. o Press the ON/OFF button (1). o All of the cooking zone indicators will come on. -
Page 13: Switching The Hob Off
o The zone will switch off immediately. o A flashing “H” symbol will show in the cooking zone indicator until the temperature of the zone falls below 60°C (see the section on the “residual heat indicator” for further information). Switching the hob off Once you have switched off all of the cooking zones, you should switch the hob off. -
Page 14: Cookware That Is Suitable For An Induction Hob
Cookware that is suitable for an induction hob The table below shows cookware that is normally suitable for use on an induction zone hob:- Cookware Suitable Steel, enamelled steel Cast iron Stainless steel Yes (if stated by the pan manufacturer) Aluminium, copper, brass Glass, ceramic, porcelain o The bottom of the pans should be as flat and thick as possible. -
Page 15: The Booster Function
Your hob also has an alarm mode which is a count-down timer that does not control the heating elements. o The timer alarm can be activated when the cooking zones are switched off by using the timer plus and minus buttons. o You can set a count-down time between 1 –... -
Page 16: The Keep-Warm Function
Keep-warm function o The keep-warm function keeps cooked food warm on a cooking zone until it is ready to be served. When this function is activated, the cooking zone operates with a low power. o When the keep-warm function for a cooking zone is set, the relevant display will show a “U”... -
Page 17: The Safety Lock
switches off. The cooking zone may be switched off at any time using the ON / OFF button (1) which will terminate any active pause function. o To end the pause mode and put the cooking zones into operation again, press the pause button (10) again and any other key within 10 seconds. -
Page 18: Fan Control (Integrated Cooling Of The Generator)
Fan control (integrated cooling of the generator) o The cooling of the hob is integrated within the plastic housing of the inductor heat element. The operation of the fan is controlled by the temperature which is measured at the heat sink. o The fan switches on when a certain temperature is reached and switches to a higher speed when the second temperature limit is reached. -
Page 19: Cleaning And Maintenance
Especially if pointed or hard objects are allowed to fall on it with some force. o DO NOT USE THE HOB IF THE SURFACE BECOMES BROKEN OR CRACKED. YOU SHOULD CONTACT THE BAUMATIC CUSTOMER CARE DEPARTMENT IMMEDIATELY. Cleaning and maintenance Cleaning operations must only be carried out when the hob is cool. -
Page 20: After Each Use
After each use o Wipe the appliance over with a damp cloth and a little washing up liquid. o Dry the appliance by rubbing the surface with a clean cloth. Cleaning table Type of deposit Remove Remove What should I immediately? when the use to remove... -
Page 21: Using A Specialist Ceramic Hob Cleaner
Using a specialist ceramic hob cleaner It is possible to purchase specialist ceramic hob cleaner/conditioner. You should follow the instructions given by the manufacturer of the specialist ceramic hob cleaner. You should ensure that it is suitable for use on your appliance. Installation The installation must be carried out by a suitably qualified person, in accordance with the current... -
Page 22: Unpacking The Appliance
1 Baumatic hob 1 Ceramic hob scraper 1 Installation and instruction manual 1 Baumatic guarantee card 4 Fixing brackets 4 Fixing screws Installing the appliance o Cut a hole in the worktop that corresponds with the drawing... - Page 23 o If the hob is being installed without an oven below it, a separator panel must be placed between the bottom of the hob and the housing below it, at a minimum distance of 10 mm. o If the hob is being installed with an oven below it, place a separator panel at a minimum distance of 15 mm and follow the oven manufacturer’s...
- Page 24 o IMPORTANT: Do not use a silicon sealant to seal the appliance against the aperture. This will make it difficult to remove the hob from the aperture in future if it needs to be serviced. o Insert the fixing clips into the holes around the side of the hob (under the level of the ceramic glass).
-
Page 25: Electrical Connection
Electrical connection This appliance must be installed by a qualified person in accordance with the latest edition of the I.E.E. Regulations and in compliance with Baumatic’s instructions. Before connecting the appliance, make sure that the supply voltage marked on the rating plate corresponds with your mains supply voltage. -
Page 26: Replacing The Mains Supply Cable
o IMPORTANT: The appliance must NOT be connected to the mains supply by means of a 13A plug and socket. o The cable can be looped if necessary, but make sure that is not kinked or trapped when the hob is in position. Care must be taken to avoid the cable being in contact with hot parts of the appliance. -
Page 27: My Appliance Isn't Working Correctly
* IMPORTANT: If the cooking zone does appear to be hotter than 60°C and the residual heat indicator has not come on, you should call the Baumatic Customer Care Department. o A humming sound is heard when a cooking zone is selected. -
Page 28: Error Codes
Error codes The following error codes may appear in the timer display if there is a problem with the operation of the hob. Error Description Possible cause Solution code Overheating of the Cooling down induction coils. necessary. ER03 & Permanent use of Water or cooking Cleaning of permanent... - Page 29 Or any installation other than the one specified by Baumatic Ltd. has been completed. Please refer to the conditions of guarantee that appear on the...
-
Page 30: Contact Details
United Kingdom Baumatic Ltd., Czech Republic Baumatic Buildings, Baumatic CR spol s.r.o. 6 Bennet Road, Průmyslová zóna Sever 696 Reading, Berkshire 460 11 Liberec 11 RG2 0QX Czech Republic United Kingdom +420 483 577 200 Sales Telephone (0118) 933 6900 www.baumatic.cz...
Need help?
Do you have a question about the BHI900SS and is the answer not in the manual?
Questions and answers