Table of Contents
Advertisement
Using a induction hob scraper
A induction hob scraper will be provided with your appliance. The
following guidelines should be followed when using the induction hob
scraper:-
o The scraper should be placed on the induction surface at an angle.
o Residues should be removed by sliding the blade carefully over the
induction surface.
o The induction surface should be wiped with a damp cloth and a
small amount of washing up liquid.
o Dry the appliance by rubbing the surface with a clean cloth.
Using a specialist induction hob cleaner
It is possible to purchase specialist induction hob cleaner/conditioner.
You should follow the instructions given by the manufacturer of the
specialist induction hob cleaner. You should ensure that it is suitable
for use on your appliance.
Cleaning the hob burner
The hob burner should be cleaned once a week or more frequently if
they get soiled.
o IMPORTANT: Make sure that the hob surface, pan stand and hob
burner have cooled before you attempt to touch them.
o Remove the hob burner by pulling them upwards and away from
the hob top.
o Soak them for about ten minutes in hot water and a little detergent.
o After cleaning and washing them, wipe and dry them carefully.
o Before placing the burner back on the hob top, make sure that
the gas jet is not blocked.
o IMPORTANT: Make sure that you reassemble the burner in the
original way.
27
Advertisement
Table of Contents
