The Hob Timer (Linked To A Cooking Zone) - Baumatic BHI909TS. GWK Instruction Manual

The hob timer (linked to a cooking zone)

You are able to link a countdown time to a cooking zone so that when
the countdown time has elapsed the cooking zone will switch off
automatically.
o Press the ON/OFF button to turn the hob on.
o Press the cooking zone selection button of the cooking zone
that you want to use and place a suitable pan on the selected
cooking zone.
o Select the power level for the cooking zone that you have selected,
using the plus and minus buttons
o Press the timer button to enter the countdown setting mode.
The timer indicator will flash and the default countdown time of
"00" minutes will appear in the display.
o Set the required countdown time using the plus and minus
buttons. Each press of the plus or minus button will increase or
decrease the time by 1 minute.
o If you press and hold the plus or minus button the time will
increase or decrease by 10 minutes.
o When the required countdown time is shown in the display, release
all buttons. The display will show the remaining time and the timer
indicator will flash for a few seconds before the countdown begins
automatically.
o A red dot (LED) will appear in the corner of the timer display
(7) to indicate the relevant zone associated with the hob
timer. E.g. If the bottom right LED is on, the bottom right
cooking zone has an operationa
NOTE: You can set up a hob timer for each induction cooking
zone separately, which can run simultaneously. Just follow the
steps above, using the hob selection buttons (2) to select each
hob independently. Once set, the timer (7) will display the
time/hob ending the soonest.
WARNING: If any other cooking zones are in use without the
hob timer they will continue heating. You will need to switch
them off manually when cooking is complete.
o When the set hob time has elapsed an alarm will sound for 2
minutes or until any button is pressed, and the cooking zone will
turn off. The timer indicator will show "00".
l timer.
19