34. After finishing of the FTDIBUS.INF Device Driver installation the following message
boxes appears
35. Click "Next"
36. The following message box appears
37. Install Hardware Device Drivers by recommended selection as described above
38. Click "Next"
Rev. 1.0
© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such
copying and passing onto third parties.
.
7211RB11
Application Note
BlueBox Demo-Board for the digital sensors
SMB365 (acceleration) and SMD500 (pressure)
Page 14
Bosch Sensortec
AN18002