46. If the driver file has been successfully found, the following message box appears
47. Confirm the selection by clicking "Next"
48. If the driver file has been successfully installed, the following message box appears
49. Click "Finish" to complete the Device Driver installation
Rev. 1.0
© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such
copying and passing onto third parties.
.
7211RB11
Application Note
BlueBox Demo-Board for the digital sensors
SMB365 (acceleration) and SMD500 (pressure)
Page 16
Bosch Sensortec
AN18002