Bosch SMB365 Application Note page 11

16. After restarting the computer, connect the BlueBox demo board to a free USB port
17. Turn on the BlueBox (main switch on the board into the direction to the USB connector)
18. The following message boxes appears
19. Click "Next"
20. The following message box appears
21. Install Hardware Device Drivers by recommended selection as described above
22. Click "Next"
Rev. 1.0
© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such
copying and passing onto third parties.
.
7211RB11
Application Note
BlueBox Demo-Board for the digital sensors
SMB365 (acceleration) and SMD500 (pressure)
Page 11
Bosch Sensortec
AN18002