2
Hard- & Software Installation
1. Insert SensorDesktop-CD
2. Run "setup.exe" from the directory ...:\ SensorDesktop _DemoSoftware
3. The following message box appears
4. Click "Next"
5. The following message box appears
6. Select the primary installation directories "BST_SensorDesktop" and "National
Instruments" in the user specific directory "Program Files" (drive may vary from C:\)
7. The following message box appears
Rev. 1.0
© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such
copying and passing onto third parties.
.
7211RB11
Application Note
BlueBox Demo-Board for the digital sensors
SMB365 (acceleration) and SMD500 (pressure)
Page 8
Bosch Sensortec
AN18002