Bosch SMB365 Application Note page 38

•
Interrupt functionality, e.g. for theft protection
•
Reduced power consumption (20%)
•
Reduced acceleration output signal resolution (7 bit)
•
Two selectable acceleration ranges: 2g and 10g
•
Individual interrupt settings for each axis:
o Threshold (5 bit): 1d = 16LSB (64mg in 2g mode and 0.32g in 10g mode)
o Hysteresis (3 bit): 1d = 64LSB (256mg in 2g mode and 1.28g in 10g mode)
•
Full selftest capability (see chapter 4.3.4)
20
21
22
23
24
25
How to set up the SMB365 in axis independent interrupt conditions:
•
Select Low-Power Mode [20]
Rev. 1.0
© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such
copying and passing onto third parties.
.
7211RB11
Application Note
BlueBox Demo-Board for the digital sensors
SMB365 (acceleration) and SMD500 (pressure)
27
5
26
28
Page 38
Bosch Sensortec
AN18002
29
30
8 9