Calibrate At Sea Level (Manual) - Bosch SMB365 Application Note

3.3.2 Calibrate at sea level manually
This function applies to altitude measurements under a known and manually obtained sea level
pressure.
Open Settings
1.
2. Choose "manual tab" [a]
c
3. Obtain current pressure at sea level
o E.g. from local weather service or nearby airport
4. Choose corresponding unit [b]
5. Put in the pressure value [c]
6. Confirm with OK [d] or cancel [e] selection
Rev. 1.0
© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such
copying and passing onto third parties.
.
7211RB11
Application Note
BlueBox Demo-Board for the digital sensors
SMB365 (acceleration) and SMD500 (pressure)
Calibrate at sea level
b
d e
a
Page 23
Bosch Sensortec
AN18002