Bosch SMB365 Application Note page 12

23. The following message box appears
24. Locate Files by selecting "CD-ROM drives" and "Specify a location" as described above
25. Click "Next"
26. The following message box appears
27. Make sure that the correct CD-ROM is inserted and confirm by clicking "OK"
28. Select "FTDIBUS.INF" as Hardware Device Driver
29. Click "Open"
Rev. 1.0
© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such
copying and passing onto third parties.
.
7211RB11
Application Note
BlueBox Demo-Board for the digital sensors
SMB365 (acceleration) and SMD500 (pressure)
Page 12
Bosch Sensortec
AN18002