Sensor Evaluation And Direct Data Export - Bosch SMB365 Application Note

4.4

Sensor Evaluation and Direct Data Export

Using the BST Sensor Desktop software in combination with the BlueBox demo board, it is
possible to perform a minor sensor evaluation. This includes both the SMD500 pressure and the
SMB365 acceleration sensor simultaneously. For basic evaluation purposes, the software
features a so-called online Direct Data Export in *.txt format via USB or wireless via Bluetooth.
The Direct Data Export is unlimited in time. While exporting the Data, for each tab activated
(Cockpit, Altimeter or Accelerometer) a corresponding header is automatically added to the *.txt
file. This means that only the active tab corresponding data is recorded.
Note: To sample either pressure or acceleration specific signals please use corresponding tab
for increased sampling speed.
How to perform a Direct Data Export:
•
Open menu "Export Data" from the Sensor Desktop menu bar.
•
Check "Activated" box
•
Browse and/or create storage folder
•
Choose appropriate filename and confirm with "OK"
Rev. 1.0
© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such
copying and passing onto third parties.
.
7211RB11
Application Note
BlueBox Demo-Board for the digital sensors
SMB365 (acceleration) and SMD500 (pressure)
Page 42
Bosch Sensortec
AN18002