Identifier
Status
Replacing the subwoofer
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Procedure
1
Align the screw holes on the subwoofer with the screw holes on the middle
frame.
2
Replace the four screws (Washer type M3x4) that secure the subwoofer to the
middle frame.
3
Route the subwoofer cable (WOOFC1) through the routing guides on middle
frame and connect it to the system board.
Identifier
Status
Post-requisites
1
Replace the
system-board
2
Replace the
back
GUID-843C6FE2-25D0-48C6-8EB2-9829A89CC1C8
Released
computer. After working inside your computer, follow
After working inside your
GUID-BE616652-3985-4843-8F35-549F91910D72
Released
GUID-EB349C56-69A8-4386-A37B-EB408439BE62
Released
shield.
cover.
computer. For more safety best
www.dell.com/
Before
69