Control Panel Messages - Xerox PHASER 5400 Advanced Features And Troubleshooting Manual

Control Panel Messages

When the printer's control panel displays a message, find the message in the following
table listed in alphabetical order. If there is a problem, perform the corrective action for
resolving the problem. If the problem persists, check the Xerox troubleshooting knowledge
database on the web at: www.xerox.com/officeprinting/infoSMART/ or contact your
Customer Support Center.
Error Description and corrective action
All Jobs Appears when using the secure print feature.
Delete




All Jobs Appears when using the secure print feature.
Print




Canceling Job... Tells you that a job is being cancelled.
<Job Name>
Clear Paper Path Appears following an initial paper jam message.


Close Covers The top or rear cover is open.


Close Stacker Door The Stacker Bin's rear door is open.


Close Tray 2 Rear The printer cannot feed from the 2,000-Sheet Feeder when installed as Tray
Door 2, because the rear tray is open.


Close Tray 3 Rear The printer cannot feed from the 2,000-Sheet Feeder when installed as Tray
Door 3, because the rear tray is open.


Delete All Jobs Appears when using the Reset Menu to delete secure and proof jobs from the
hard disk.






Delete All Jobs Deleting all jobs from the disk has failed, because the disk was locked via a
Disk Locked PJL or SNMP command or through CentreWare Internet Services. It will be
necessary to unlock the disk before deleting all jobs.
Deleting... Tells you that the secure and proof jobs you asked to delete (in the previous
message) are being deleted.
<Job Name>
Advanced Features and Troubleshooting Manual
Press the Enter key (labeled 4) to delete all secure jobs in your queue.
Press the Value keys (labeled 3 or 7) to toggle between
.
Print
Press the Enter key (labeled 4) to print all secure jobs in your queue.
Press the Value keys (labeled 3 or 7) to toggle between
.
Print
Remove any jammed paper from the exposed paper path, close the covers
and trays, then refer back to the control panel for further messages.
Close the open cover to resume printing.
Close the door to resume printing.
Close the door to resume printing.
Close the door to resume printing.
Press the Value keys (labeled 3 or 7) to toggle between
and press the Enter key (labeled 4) to delete the jobs.
Select
Yes
Select and press the Enter key to exit without deleting the jobs.
No
Control Panel Messages
and
Delete
and
Delete
and .
Yes No
87