Reset Menu - Xerox PHASER 5400 Advanced Features And Troubleshooting Manual

Control Panel Menus

Reset Menu

Accesses printer reset functions. This menu only appears when the printer is powered on
while holding down the On Line and
Reset Menu Items
Menu Items Description
Factory Defaults Resets menus to factory defaults — with the exception of
Defaults
and Novell menus).
Values:
Network Defaults Resets parameters in the Ethernet and Novell menus to factory defaults.
Values:
Demo Mode Places the printer in demo mode.
Values:
In Demo Mode, you can print different factory-installed demo pages by using
the eight control panel keys to select the type of demo page.
Once in Demo Mode, the printer re-enters Demo Mode automatically every
time the power is cycled.
Exit Demo Mode by powering on the printer while holding down the
On Line and Enter keys (labeled 0 and 4).
Delete All Jobs Deletes all secure jobs from the hard disk. (This menu item only appears if
the optional hard drive is installed.)
Values:
Disk Initialize Initializes the hard disk. (This menu item only appears if the optional hard
drive is installed.)
Values:
Note: This is ignored if the disk is locked (write protected) via a PJL or SNMP
command.
Disk Format Formats the hard disk drive and forces a Printer Restart. (This menu item
only appears if the optional hard drive is installed.)
Values:
Normally, you only use this menu item if the disk was not already formatted.
If used on a formatted disk, it will write over any existing data on the disk.
Note: This is ignored if the disk is locked (write protected) via a PJL or SNMP
command.
28
Enter key
in the
System Menu
Yes
(default)
No
Yes
(default)
No
Yes
(default)
No
Yes
(default)
No
Yes
(default)
No
Yes
(default)
No
s (labeled 0 and 4).
and network parameters (in the Ethernet
Xerox Phaser 5400 Laser Printer
and
Language