Adding Yourself To A Shared-Line Call - Cisco 7961G Phone Manual

Adding Yourself to a Shared-Line Call

Depending on how your phone is configured, you can add yourself to a call on a shared line using
either Barge or cBarge.
If you want to...
See if the shared line is
in use
View details about
current calls on the
shared line
Add yourself to a call
on a shared line using
the Barge softkey
Add yourself to a call
on a shared line using
the cBarge softkey
Add new conference
participants to a call
that you have barged
Leave a barged call
Tips
• If a phone that is using the shared line has Privacy enabled, call information and barge softkeys
will not appear on the other phones that share the line.
• You will be disconnected from a call that you have joined using Barge if the call is put on hold,
transferred, or turned into a conference call.
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified CallManager 5.0 (SCCP)
Then...
Look for the remote-in-use icon
Press the red line button
appear in the call activity area of the phone screen.
1. Highlight a remote-in-use call.
2. Press Barge. (You may need to press the more softkey to display
Barge.)
Other parties hear a beep tone announcing your presence.
1. Highlight a remote-in-use call.
2. Press cBarge. (You may need to press the more softkey to display
cBarge.)
Other parties hear a tone and brief audio interruption, and call
information changes on the phone screen.
Barge the call using cBarge, if available.
Unlike Barge, cBarge converts the call into a standard conference call,
allowing you to add new conference participants. See the "Making
Conference Calls" section on page 30.
Hang up.
If you hang up after using Barge, the remaining parties hear a disconnect
tone and the original call continues.
If you hang up after using cBarge, the call remains a conference call
(provided at least three participants remain on the line).
next to a red line button
for the remote-in-use line. All non-private calls
Advanced Call Handling
.
37