Furuno FR-2125V Installation Manual page 62

3. Unfasten the cable clamp at the rear of the display unit.
4. Using the bolts used to fix the cable clamp fasten the edge guard to the cable
entrance as shown below. (The edge guard protects cables from damage.)
Figure 4-20 How to fasten the edge guard
5. Wire the display unit, referring to page 2-9.
6. Fasten the rear cover (supplied) at the rear of the display unit with six binding
screws (M4X8).
Rear Cover
03-144-1791-0
Figure 4-21 How to fasten rear cover
J106
J105
*
J104
J103
*
J446
J466
J462
J465
Binding Screw
M4X8, 6 pcs.
4-21
Edge Guard
03-144-1816-0
*
*
*
REAR VIEW