Furuno FR-2125V Installation Manual page 54

1. Open the monitor and fix it with the stay. See page 1-5 for instructions.
2. Fasten the M-card base assy. with one M4X8 pan-head screw as below.
Figure 4-12 Display unit, inside view
3. Fasten the ground wire with the M3X8 pan-head screw and M3 teethed lock
washer.
4. Fix the M-card case assy. with two M3X8 pan-head screws.
5. Set the M-card case cover to the hole in the front panel and fix with two M2.6X5
pan-head screws.
Pan-head screw A
M3X8
Teethed lock washer
M3
Pan-head screw
M2.6X5, 2 pcs.
Pull forward
and fix.
Figure 4-13 Display pedestal, front view
Fasten with M3 x 8
screws (2 pcs.)
Pan-head screw B
M4X8
Pan-head screw B
M3X8, 2 pcs.
M-card case cover
4-13
Fasten with
M4 x 8 screws.
M-card base assy.