Furuno FR-2125V Installation Manual page 17

3. Retract the stay to lower the monitor.
4. Unfasten eight binding screws (M4X8) to dismount the top cover 1, right cover
2 and left cover 3.
5. Loosen three screws (M4X10) fixing the left maintenance cover (4). Slide the
cover to dismount it.
6. Loosen four screws (M4X10) fixing the lead-in cover (5) at the rear of the
display pedestal. Slide the cover to dismount it.
Binding Screw
M4X8, 2 pcs.
Left Cover (3)
Push in direction
of arrow
Pan-head Screw
M4X10, 3 pcs.
7. At the left side of the monitor, unfasten the clamp which fixes the control head
cable.
8. At the rear of the display pedestal, fasten the clamp which fixes the control
head cable.
Touching inside
of CRT panel
A
Left Maintenance Cover (4)
A
EXPLODED VIEW
Figure 1-13 How to dismount covers
Top Cover (1)
Binding Screw
M4X8, 4 pcs.
1-10
Lead-in Cover (5)
Pan-head Screw
M4X10, 4 pcs.
Push in
direction of
arrow.
(Do same on
other side.)
Left Cover (2)
Binding Screw
M4X8, 2 pcs.