Furuno FR-2125V Installation Manual page 28

Fabricating the AC power cable (supplied)
1. Remove the vinyl sheath by 80 mm.
2. Cut off jute tape wrapped around the armor.
3. Unravel the armor to expose the cores by about 35 mm.
4. Remove insulation of cores by about 10 mm. Fix crimp-on lugs type FV5.5-4 to
the cores.
5. Cover the armor with vinyl tape, leaving the portion which will lie inside the
cable clamp untaped.
(a)
Vinyl sheath
(b)
(c)
(d)
Core
S = 3.5 mm
= 2.4 mm
Figure 2-8 Fabricating power cable DPYCY-3.5
DPYCY-3.5
Approx. 80 mm
40 mm
5 mm
Armor
10 mm
Clamp here.
Taping
2
(sectional view)
2-6
Core
Crimp-on lug
FV5.5-4
Armor
Vinyl sheath