Furuno FR-2125V Installation Manual page 19

13.Unfasten three screws (M5X25) to remove the right KB arm (9) and the left KB
arm (q0 ) .
14.Unfasten one screw (M4X10), two screws (M5X12) to dismount the panel cover
(q1 ) .
15.Fasten the two upset screws (M5X12) unfastened at step 14 at the front bottom
of the control head.
Left KB Arm (
Screw
M5X25, 3 pcs.
Panel Cover (
Push up
to fix
Pan-head Screw
M4X10
Control Head
)
11
10 )
Figure 1-15 Detaching the control head
1-12
Screw
M5X12, 2 pcs.
Right KB Arm (9)
Screw
M5X25, 3 pcs.
Screw
M5X25 (4 pcs.,
incl. those on
opposite side)