Removing The Front Doors; Installing The Front Doors - NEC HX4500 User Manual

Removing the Front Doors

You must remove the front doors to remove the side panels on your system. To remove
the front doors.
1. Open the front doors and power off the system. Ensure the power cords are
unplugged from the AC wall outlet.
2. Lift one of the front doors and pull it towards you (see Figure 4-1). The mounting
pins of the front door are disengaged from their mounting holes on the front of the
system.
3. Remove the other front door in the same manner.

Installing the Front Doors

Install the front doors as follows.
1. Orient one of the front doors so the mounting pins of the front door are aligned with
their mounting holes on the front of the system. Slide the lower mounting pin into
its mounting hole and then slide in the upper pin.
2. Install the other front door in the same manner.
Figure 4-1. System Front Doors
Upgrading Your System 4-7