Clearing And Changing The Password - NEC HX4500 User Manual

Clearing and Changing the Password

Clear and change the password as follows.
1. Power off the system and remove the panels as described in the Upgrades
and Options chapter.
2. Move the Password Clear switch 13A SW2 to ON (see Figure 3-4).
3. Power on the system and wait for POST to complete. This automatically
clears the old password.
4. Power off the system.
5. Move the Password Clear switch back to OFF.
6. Replace the panels and power on the system.
7. To specify a new password run the Setup Utility.
3-28 Configuring Your System