NEC HX4500 User Manual page 106

8. Using the four screws supplied with the drive, reinstall the side rails just removed
from the blank panel tray (see Figure 4-21, A). The rails for each side of the device
are identical.
Note:
Do not use the screws used to secure the blank panel
tray.
A
B
Figure 4-21. Attaching Side Rails to a Device
9. Engage the device side rails into the bay guide rails (see Figure 4-22). Ensure that
the device side rails (see Figure 4-23, A) are inside the bay guide rails exactly as
shown in Figure 4-23, B.
10. Push the drive into the bay until the screw holes of the side rails are directly in front
of the chassis screw holes and secure with the screws previously removed.
C
A
Figure 4-22 Installing Device
Attaching side rails to
removable media drive
B
A Side rails
B Four drive mounting
screws
C Drive
Upgrading Your System 4-35