Installing The Top Cover And Side Panels - NEC HX4500 User Manual

Installing the Top Cover and Side Panels

Install the top cover and side panels as follows.
1. Before replacing the top cover or side panel, make sure no tools or loose parts have
been left inside the system chassis.
2. Make sure all option boards are firmly seated in their respective slots and that all
interior cables are properly connected.
3. The top cover and side panels have tabs that align with the slots in the chassis (see
Figure 4-3). Align the tabs with the slots in the chassis and carefully push inward.
4. Slide the cover or panel toward the rear of the chassis so the tabs firmly engage in
the slots.
5. Attach the cover or panel to the chassis by firmly tightening the two thumb screws.
Note:
reconnect the peripherals, and power on the peripherals and system.
4-10 Upgrading Your System
Figure 4-3. Top Cover and Side Panels Removal
If your system is already set up, plug the system back in,