Removing The Front Doors; Installing The Front Doors; Removing The Top Cover And Side Panels - NEC HX4600 User Manual

Removing the Front Doors

You must remove the front doors to remove the side panels on your system. To remove
the front doors.
1. Open the front doors and power off the system. Ensure the power cords are
unplugged from the AC wall outlet.
2. Lift one of the front doors and pull it towards you (see Figure 4-1). The mounting
pins of the front door are disengaged from their mounting holes on the front of the
system.
3. Remove the other front door in the same manner.

Installing the Front Doors

Install the front doors as follows.
1. Position one of the front doors so the mounting pins of the front door are aligned
with their mounting holes on the front of the system. Slide the lower mounting pin
into its mounting hole and then slide in the upper pin.
2. Install the other front door in the same manner.

Removing the Top Cover and Side Panels

To install options in your system, you should do the following.
T
To modify the system I/O board, add an option board, or add a removable media
device, remove the top cover
4-6 Upgrading Your System
Figure 4-1. System Front Doors