Installing A Hard Drive - NEC HX4500 User Manual

Installing a Hard Drive

Use this procedure to add an optional hard drive to your system.
1. Power off the system. If locked, unlock and open the right front door.
2. Determine which hard drive cage will contain the new hard drive. Open the EMI
metal panel in front of the hard drive cage by turning its two thumb lock screws
counter clockwise (see Figure 4-25).
3. The hard drive cage has four slots for mounting the hard drives. Confirm which slot
of the hard drive cage the hard drive will be mounted. The SCSI ID (0 through 4) is
determined by the slot number from left to right.
Figure 4-25. Hard Disk Drive Cages
Three hard drive cages
(EMI panel and exterior door
shown open)
Upgrading Your System 4-39