NEC HX4500 User Manual page 60

Option
SCSI Bus Interface Definitions
Host Adapter SCSI ID
SCSI Parity Checking
Host Adapter SCSI Termination
Additional Options
Boot Device Options
Boot Channel
Boot SCSI ID
Boot LUN Number
SCSI Device Configuration
Initiate Sync Negotiation
Maximum Sync Transfer Rate
Enable Disconnection
Initiate Wide Negotiation
Send Start Unit Command
BIOS Multiple LUN Support
Include in BIOS Scan
Advanced Configuration Options
Reset SCSI Bus at IC Initialization
Extended BIOS Translation for DOS Drives
>1 GByte
Host Adapter BIOS (Configuration Utility
Reserves BIOS Space)
Support Removable Disks
Under BIOS as Fixed Disks
Display <Ctrl-A> Messages During BIOS
Initialization
BIOS Support for Bootable CD-ROM
BIOS Support for INT 13 Extensions
1
No effect if BIOS is disabled.
2
Do not remove media from a removable media drive if it is under BIOS control.
3
Set to Disable if NetWare 3.12 or 4.11 Network Operating System is installed.
4
Set to 40.0 for channel A or 10.0 for channel B.
5
Set to Yes for channel A or No for channel B.
6
Set to Enabled for channel B or Disabled for channel A.
7
Set to 0 for channel A or 5 for channel B.
3-16 Configuring Your System
Table 3-6. SCSISelect Setup Configurations
1, 2
Recommended Setting or
Display Only
7
Enabled
Enabled
Press Enter for menu
A First
7
0
0
Press Enter for menu
Yes
4
40.0
Yes
5
Yes
1 and 5
Yes
1
no
1
Yes
Press Enter for menu.
Enabled
Enabled
1
Enabled.
1
Boot Only
1
Enabled
1 6
Disabled
1
Enabled
Your Configuration