Preparing Your System for Upgrade
Have the following tools available:
T
Phillips screwdriver (#1 bit and #2 bit)
T
flat-head screwdriver
T
small needle nose pliers
T
pen or pencil
T
utility knife
T
ESD workstation or antistatic wrist strap (recommended)
T
IC removal tool.
Equipment Log
Use the equipment log form located at the end of this guide to record the model and
serial number of your system, all installed options, and any other pertinent information
specific to your system. You need this information when configuring your system.
4-6 Upgrading Your System