Rinse And Spin - Kenmore One-Speed Automatic Washers Owner's Manual & Installation Instructions

SETTING YOUR CYCLE
SELECTOR (TIMER) CONTROL
• For sturdy or heavily soiled loads, use
SUPER.
• For moderately soiled loads, use
REGULAR.
• For delicate or lightly soiled loads, use
SHORT.
HEAVY DUTY
Use this cycle to get up to 14 minutes of
wash time. Wash combines fast speed
agitation and fast spin speeds.
PERMANENT PRESS
II ''j'+++'j_'+'m"-I_l m[:_ _d
The PERMANENT PRESS cycle includes
a load cooling process that reduces
wrinkling compared to other cycles.
Use this cycle to get up to 10 minutes of
wash time. Wash combines fast speed
agitation and fast spin speeds.
NOTE: When the timer reaches PAUSE,
the washer will drain and pause for no
more than two minutes while some of
the wash water is replaced with rinse
water.
HEAVY DUTY
_4m+
PERMANENT
: PRESS
110 $1JPER
HOTIC_O
| RIGULAR
WArM I COLD
SHOAT
COLO i C_I_
RINSE AND SPIN
When using extra detergent for heavily
soiled clothes, or washing special-care
items, you may find an extra rinse and
spin is needed.
STEP 1. Set WATER LEVEL Control.
STEP 2. Set the Cycle Selector Control
(Timer) knob to the RINSE setting.
STEP 3. Pull Cycle Selector Control
(Timer) knob out to start washer.
SPIN ONLY
A drain and spin may help shorten drying
times for some heavy fabrics or special-
care items by removing excess water,
STEP 1. Set the Cycle Selector Control
(Timer) knob to the SPIN setting,
STEP 2. Pull the Cycle Selector Control
(Timer) knob out to start washer.
12
14
17