Rinse And Spin - Kenmore Two-speed automatic washers Owner's Manual & Installation Instructions

2ND RINSE (on some models)
A second rinse removes excess
detergent residue.
1. Set the WATER LEVEL Control.
2, Set the WATER TEMPERATURE
Control.
3. Set the Cycle Selector Control (Timer)
to 2ND RINSE.
4. Pull the Timer knob out to start the
washer.
NOTE: You may select an additional
SPIN only.
• Set the Timer knob to SPIN.
• An additional spin may shorten drying
times for heavy fabrics or special-care
items by removing excess water.
RINSE AND SPIN
When using extra detergent for heavily
soiled clothes, or washing special-care
items, you may find an extra rinse and
spin is needed,
1. Set WATER LEVEL Control.
2, Set WATER TEMPERATURE Control,
3. Set the Cycle Selector Control (Timer)
Knob to a RINSE setting:
• For fast agitation and spin, use the
HEAVY DUTY Cycle.
• For slow agitation and spin, use the
PERMANENT PRESS Cycle.
• For slow agitation and fast spin, use the
NORMAL Cycle.
4. Pull Cycle Selector Control
(Timer) Knob out to start washer.
SPIN ONLY
A drain and spin may help shorten drying
times for some heavy fabrics or special-
care items by removing excess water.
1, Set the Cycle Selector Control (Timer)
Knob to a SPIN setting:
• For fast spin, use the NORMAL Cycle.
• For slow spin, use the PERMANENT
PRESS Cycle.
2, Pull the Cycle Selector Control (Timer)
Knob out to start washer.
SOAK
DELICATE
PIERMANENT PRESS lm
HEAVY DUTY
su_
PREWASH
SOAK
DELICATE
PERMANENT PRESS 1¢
19