Kenmore One-Speed Automatic Washers Owner's Manual & Installation Instructions page 26

Problem Possible Cause Solution
Tearing Overloading. improper Loads should move freely during
use of washer, wash. Wash smaller loads.
Improper use of chlorine Do not pour chlorine bleach directly
bIeach. Undiluted bleach on load. Wipe up bleach spills.
will damage fabrics.
Sharp items not removed Clean out pockets before washing.
from pockets; fasteners Zip zippers before washing.
not fastened.
Items damaged before Mend rips and broken threads in
washing, seams before washing.
Stains on Improper use of fabric Dilute fabric softener and add to
Load softener in washer or dryer, deep rinse only.
Iron in water (rust). InstaIIan iron filter.
Under use of detergent causing Use enough detergent to remove
soiI to be redeposited, soil and hold it in suspension.
Dye transfer due to not Sort dark clothing from whites
sorting Ioads properly, and lights.
Dye transfer due to not Unload the washer as soon as
unloading washer promptly, it stops.
Load is Not removing load promptly. Unload the washer as soon as it stops.
Wrinkled
Overloading. Loads should move freely during
wash. Wash smaller loads.
Hoses reversed. Reverse hoses (see "Installation
Instructions").
Load is Overloading. Loads should move freely during
Tangled/ wash. Wash smaller loads.
Twisted
Clothes wrapped around Do not wrap items around agitator
agitator, when loading the washer.
26