Table of Contents
Advertisement
CS1768 User Manual
F1: GOTO
Clicking the F1 field or pressing [F1] activates the GOTO function. GOTO
allows you to switch directly to a port either by keying in the port's Name, or
its Port ID.
To use the name method, key in 1; key in the port's Name; then press
[Enter] to switch KVM, Audio and USB focus; or [Spacebar] to switch
KVM and Audio only.
To use the port ID method, key in 2; key in the Port ID; then press [Enter]
to switch KVM, Audio and USB focus; or [Spacebar] to switch KVM and
Audio only.
Note: You can key in a partial name or port ID. In that case, the screen will
show all the computers that the user has View rights to (see SET
ACCESSIBLE PORTS, page 33), that match the name or port ID
pattern, regardless of the current list settings (see F2 LIST, page 30, for
details).
To return to the OSD main screen without making a choice, press [Esc].
F2: LIST
This function lets you broaden or narrow the scope of which ports the OSD
displays on the main screen. The submenu choices and their meanings are
given in the table below.
Choice
ALL
Lists all of the ports on the installation that have been set accessible
by the administrator for the current logged in user.
QUICK VIEW
Lists only the ports that have been selected as quick view ports (see
SET QUICK VIEW PORTS, page 35).
POWERED ON
Lists only the ports that have their attached computers powered on.
QUICK VIEW +
Lists only the ports that have been selected as quick view ports (see
POWERED ON
SET QUICK VIEW PORTS, page 35), and that have their attached
computers powered on.
Move the highlight bar to the choice you want, then press [Enter]. An icon
appears before the choice to indicate that it is the currently selected one.
30
Meaning
Advertisement
Table of Contents
