Display Setup; Osd (On-Screen Display) Setup; Figure 3-46 Osd Setup Screen - Honeywell HRHD 410 User Manual

Configuration

Display Setup

Highlight OSD or Main Monitoring in the Display menu, and then press
on-screen display or camera display on the main monitor.

OSD (On-Screen Display) Setup

Use the OSD Setup screen (MENU
Time, Title and Status on screen. Each feature can be turned on or off. You can also set
up where you want the video to display on the screen by adjusting the margins.
1.
2.
3.
Rev 3.03
When it is On, the DVR notifies the remote site when it loses video input from a
camera based on a defined schedule.
Note For the Notify action to work, the DVR should be registered in the
RAS (Remote Administration System).
Figure 3-46
Highlight the box beside Date and then press
Off.
Highlight the box beside Time and then press
Off.
Highlight the box beside Title and then press
On and Off.
➤ ➤
Display
OSD Setup Screen
58
OSD) to set the DVR to display Date,
to toggle the date display On and
to toggle the time display On and
to toggle the camera title display
Document 900.0315
to set up the
02/07