Figure 3-55 Callback Center Setup Screen - Honeywell HRHD 410 User Manual

Configuration
Callback Center Setup by LAN Connections
Highlight Callback Center (MENU
. The Callback Center Setup screen displays.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Rev 3.03
Figure 3-55
Highlight the box beside IP Address and enter the IP address of the computer
you want contacted during an event.
Highlight the box beside Retry and enter the number of times you would like the
DVR to try contacting the computer. You can select from 1 to 10 retries.
Highlight the box beside E-mail notification and then press
On and Off.
Highlight the box beside SMTP Server IP and enter the SMTP server IP address,
obtained from your system administrator.
Highlight the box beside E-mail recipient and enter the recipient's e-mail address.
Use the virtual keyboard (see
Highlight the box beside E-mail sender and enter the sender's e-mail address.
Note The e-mail address must include the character @ to be a valid
address.
Highlight the box beside Authentication and press
Off.
Highlight the box beside ID and enter the SMTP ID. A virtual keyboard appears,
allowing you to enter the ID.
Highlight the box beside Password and enter the SMTP password. A virtual
keyboard appears, allowing you to enter the password.
➤
Network
Callback Center Setup Screen
Figure 3-7) to enter the e-mail address.
68
➤
Callback Center) and then press
to toggle between
to toggle between On and
Document 900.0315
02/07