Motion Detector Event Action (Notify) Setup Screen; Text-In Event Action (Record) Setup Screen; Figure 3-39 Motion Detector Event Action (Notify) Screen - Honeywell HRHD 410 User Manual

Configuration

Motion Detector Event Action (Notify) Setup Screen

Use this screen to set the DVR to notify the remote site when certain motion events are
activated.
1.
2.

Text-In Event Action (Record) Setup Screen

Use this screen to set how the DVR reacts to text input from the text-in device. You can
assign the text-in a schedule, associated camera, recording speed, video quality, and
dwell time.
Rev 3.03
Figure 3-39
Highlight the Sched box and then press
schedule as described earlier.
Highlight the Notify box and then press
When it is On, the DVR notifies the remote site when certain events occur based
on a defined schedule.
Note For the Notify action to work, the DVR should be registered in the
RAS (Remote Administration System).
Motion Detector Event Action (Notify) Screen
. A schedule screen displays. Set the
. This toggles between On and Off.
53 Document 900.0315
02/07