Honeywell HRHD 410 User Manual page 40

Configuration
5.
6.
7.
8.
9.
10. Selecting Password... enters a screen where you will be able to change
11. Selecting Date/Time... enters a screen where you will be able to set the DVR time
12. Selecting System Shutdown... shuts the DVR down. When shutting down the
Rev 3.03
Note It is your responsibility to determine if local laws and regulations
permit recording audio.
Highlight the box beside Sequence Dwell Time and select from 3 to 60 seconds
for the camera sequence dwell time.
Selecting System Information... enters a screen that allows you to set the site
name, set the language and view various system operational parameters.
Selecting Storage... enters a screen where you can check the storage status.
Selecting Camera... enters a screen where you can set up camera operation.
Selecting Network Setup... enters a screen where you can set up network
operational settings.
passwords.
and date.
DVR, you need to confirm that you want to shut down the unit and you will be
asked for an administrator password.
Note The Quick Setup mode releases automatically when a user
changes the DVR settings remotely using the RAS (Remote
Administration System) program.
22 Document 900.0315
02/07