Figure 3-29 Rs232/Rs485 Screen - Honeywell HRHD 410 User Manual

Configuration
1.
2.
Rev 3.03
Figure 3-29
Highlight the field for the settings you wish to make. Select the correct Baud Rate,
Parity, Data Bit, and Stop Bit for the device you are connecting to the DVR.
For RS232, it is possible to select either Remote Control, External Modem, or
Text-In in the Usage field.
For RS485, it is possible to select either Remote Control or PTZ Control in the
Usage field.
Note Selecting External Modem in the RS232 field only defines the
RS232C port as being used for external modem connections.
See
modem.
Note Selecting PTZ Control in the RS485 field only defines the RS485
port as being used for PTZ camera connections. Select the PTZ
device in the Camera Setup screen (see
page 34).
Note If networking is configured by the external modem, Text-In
cannot be set for the RS232 field. In the Network Setup screen,
set up the DVR for LAN communications first (see
Screen, page 60).
RS232/RS485 Screen
Modem Setup, page
43
65 for details on setting up an external
Camera Setup
Document 900.0315
Screen,
Network Setup
02/07