Configuration
7.
Date/Time Setup
Highlight Date/Time in the Main Menu (MENU
press
Caution
1.
2.
Rev 3.03
Note
Only the system administrator can upgrade the software.
You cannot upgrade the software during clip copy.
You can save your changes by highlighting OK and pressing . Selecting Cancel
exits the screen without saving the changes.
. The Date/Time setup screen displays.
Figure 3-9
If you set a date and time that is older than some of your recorded
images, any images with dates and times later than the new
setting will be deleted.
Highlight the first box beside Date/Time and then press . The individual sections
of the date highlight.
Use the Up and Down Arrow buttons or the Jog Dial to change the number. Use
the Left and Right Arrow buttons to move between month, day and year.
After you have the correct date, press
Highlight the second box beside Date/Time and press
of the time will highlight.
Use the Up and Down Arrow buttons or the Jog Dial to change the number.
Use the Left and Right Arrow buttons to move between hour, minutes and
seconds.
After you have the correct time, press
➤
Date/Time Screen
.
.
26
➤
System
Date/Time) and then
. The individual sections
Document 900.0315
02/07