Figure 3-10 Holiday Setup Screen - Honeywell HRHD 410 User Manual

Configuration
3.
4.
5.
6.
To save your changes, highlight OK and then press . Select Cancel to exit the screen
without saving the changes.
Highlight the Time Sync... box on the Date/Time Setup screen, and
synchronize the DVR time with any standard time servers that are available in most time
zones and countries, or synchronize time between two different DVRs.
Rev 3.03
Note The clock will not start running until you have restarted the unit,
so you may wish to set the time last.
Highlight the box beside Time Zone and press
from the list and press
Highlight the box beside Daylight Saving Time and press
between On and Off.
Highlight the Holiday Setup... box and press
highlighting Add: and pressing
Highlight the month and day and change them by using the Up and Down Arrow
buttons. Press to add the date. Dates can be deleted by highlighting the X
beside the date and pressing
Note Holidays that do not fall on the same date each year should be
updated after the current year's holiday has passed.
Figure 3-10
.
. The current date displays.
.
Holiday Setup Screen
27
. Select the time zone you are in
. Pressing
. You can set up holidays by
. You can
Document 900.0315
toggles
02/07