Installation
Connecting the Monitor
Connecting the Spot Monitor
Connect the Spot Monitor to either the Video Out or SVHS Out connector.
Connecting the RGB Monitor
Use the VGA port for RGB Monitor output. Connect the RGB Monitor to the VGA
connector. Connect an RGB cable with a DB15 (Male) connector which is usually less
than 10 feet (3 m) to the DVR connector.
Rev 3.03
Figure 2-6
Video Out Connectors
VIDEO OUT
SVHS OUT
Note
For Spot Monitor output, set the CVBS (SVHS) VGA selector to
CVBS (SVHS) (see
input, use it to give you better quality video display.
Note
The Video Out (BNC) and the SVHS Out connectors may be
connected to individual monitors for simultaneous operation.
Figure 2-7
VGA Connector
Figure
2-5). If your monitor has an SVHS
VGA
9
Document 900.0315
02/07