Control Functions; Variable Adjustment Of The Hydraulic Parameters (Variable Inputs And Outputs) - Honeywell SDC heating and district heating controller Service Manual

Control Functions

Para- Designation
meter
06 Collector flow
sensor
07 Buffer sensor of
collector
08 Sensor of variable
input 1
09 Sensor of variable
input 2
10 Sensor of variable
input 3
11 Room sensor SDW
10 of direct heating
circuit
12 Room sensor SDW
10 of mixed heating
circuit 1
13 Room sensor SDW
10 of mixed heating
circuit 2
114
Setting range / Setting values
–5 ... +5 K
–5 ... +5 K
–5 ... +5 K
–5 ... +5 K
–5 ... +5 K
–5 ... +5 K
–5 ... +5 K
–5 ... +5 K
6 Control Functions
6.1 Variable adjustment of the hydraulic parameters (variable
inputs and outputs)
The hydraulic presetting of the inputs and outputs of the controller
selected via the "Hydraulics" menu, Parameter 01 can be
adjusted individually. The preset hydraulics parameters can be
changed individually for this purpose.
Thus hydraulics not covered by the automatic preconfiguration
can also be implemented.
ATTENTION
The hydraulic parameters define the system. Changes can
have far-reaching effects on the way the controller works.
Parameter settings made elsewhere can be lost. Individual
adjustments must therefore be made very carefully!
SDC / DHC
Factory Setting
setting
0
0
0
0
0
0
0
0
EN2H-0221GE51 R0808