Honeywell SDC heating and district heating controller Service Manual page 34

Operation
5.1.2.6.1
Setting
Application
34
Holiday mode
In holiday mode, the heating circuits can be switched off and
protected from frost or operated based on the settings for the RED.
HEATING operating mode for the duration of the holiday based on
the presetting ("Direct circuit" or "Mixed heating circuit 1" / "Mixed
heating circuit 2" menu, parameter 25 = holiday operating mode).
► Press button.
The menu-selection level Switching time programs / Holiday
programs appears in the display.
► Turn input button
HOLIDAY appears in the display.
► Press input button
HOLIDAY 01 appears in the display.
► Press input button
The year flashes in the display.
► Set year with the input button
► Press input button
The day on which the holiday is to begin flashes in the display.
► Set the day the holiday will begin with the input button
► Press input button
TIL - - appears in the display.
► Set the day you will return from holiday with the input
î
button .
► Press input button
The desired holiday timeframe is saved.
You can now enter additional holiday timeframes (up to 15 holiday
blocks).
Longer absence while heating operation is active.
î to the left.
î .
î
.
î .
î
.
î .
î
.
SDC / DHC
î .
EN2H-0221GE51 R0808