Table of Contents
Advertisement
3.2 CONTROL SET display
This display screen is used to set up such items as the output mode of temperature
control, DIGITAL output, PID related items, and AUTO TUNING.
Return to menu screen
Key to go to PID
constant setup
screen
Key to go to PID ZONE
setup screen
(6) TROUBLE delay time
setup key
Sequence of Operation
1. Setting up the temperature control output mode
It allows you to choose to make the temperature control output mode either in direct or
reverse motion.
— To choose reverse motion
Enter REVERSE key (1). If you choose the REVERSE key, the key is reversed
from a white background with blue characters to a blue background with white
characters.
— To choose direct motion
Enter DIRECT key (1). If you choose the DIRECT key, the key is reversed.
CONTROL SET
EXIT
TEMP CONTROL
REVERSE
SIGNAL SELECT
I.S/T.S
PID
PID
ZONE
CONSTANT
TUNNING
MAN
10
TROUBLE DELAY
0
1
2
3
ESC
-
5
6
7
8
<Figure3.2.1>
- 12 -
Converted to INPUT SET screen
NEXT
DIRECT
I.S
I.S(4) T.S(4)
INNER
SIGNAL
AUTO
SEC
4
.
ENT
9
(1) Temperature reverse/direct
operation select key
(3) SIGNAL type select key
(4) SIGNAL output form display
Key to go to INNER SIGNAL
setup screen
(5) AUTO TUNING MAN/AUTO
select key
Advertisement
Table of Contents
