Mount The Oven - Kenmore 363.63672 Installation Instructions Manual

Installation Instructions
MOUNT THE OVEN
FOR EASIER INSTALLATION AND PERSONAL
SAFETY, WE RECOMMEND THAT TWO PEOPLE
INSTALL THIS OVEN.
IMPORTANT: Do not grip or use handle
during installation.
NOTE: If your cabinet is metal, use tile nylon
grommet around the power cord hole to prevent
cutting of the cord.
NOTE: We recommend using filler blocks if the
cabinet front hangs below the cabinet bottom shelf.
IMPORTANT: If filler blocks are not
used, case damage may occur from over
tightening screws.
NOTE: When mounting
the oven, thread power
cord through hole in
bottom of top cabinet.
Keep it tight throughout
Steps 1-3. Do not pinch
cord or lift oven by
p_flling cord.
l[_Lift oven, tilt it
forward and hook slots
at back bottom edge
onto two lower tabs
of mounting plate.
2]Rotate front of oven up
against cabinet bottom.
[_]Insert a serf-aligning screw through top center cabinet
hole. Temporarily secure the oven by turning the
screw at least two full turns after the threads have
engaged. (It will be completely tightened later.) Be
sure to keep power cord fight. Be careful not to pinch
the cord, espedally when mourning flush to bottom
of cabinet.
CabinetFront
CabinetBottomShelf
FillerBlock
I quivalent
to Depth
of Cabinet
Recess
Self-AligningScrew
OvenTop
[_]Attachthe oven to the top cabinet.
[] Insert 2 self-aligning screws
through outer top cabinet
holes. Turn two full turns on
each screw.
I
]Tighten center
screw completely.
[] Tighten the outer two screws to the top of the
oven. (While tightening screws, hold the oven
in place against the wall and the top cabinet.)
[_]Install grease filters. See the Use & Care Guide
packed with the oven.
18