Rear Panel - AND AD-4412-CW Instruction Manual

2.2.

Rear Panel

1. Optional ports
3. Input terminals of load cell
4. RS-232C
5. Control I/O
1. Optional ports
2. USB terminal
3. Input terminals of load cell
4. RS-232C
5. Control I/O
Table 2 Names and functions of rear panel
No. Name
1. Optional ports
2. USB terminal
3. Input terminals of load cells Four 350 Ω load cells can be connected in maximum.
4. RS-232C
5. Control I/O
6. I/F terminals
7. Power switch
8. Power cord terminals
9. LAN connector
AD-4412-CW, AD-4413-CW
Drawing 3 Rear panel of AD-4412-CW
Drawing 4 Rear panel of AD-4413-CW
Two optional boards can be installed in maximum.
Terminal to connect USB device on AD-4413-CW.
It is used to communicate printer, barcode reader and computer.
It is used to control peripherals.
Input : 11 points. Output : 11 points.
RS-485 and photo eye sensor terminals.
It is used for stream mode and communication with PLC using
Modbus RTU. It uses as power source of photo eye sensor.
It is the main power supply switch for the indicator.
Power supply range : 100-240 V~
It is used communication using Modbus TCP and a PDF output
to the printer on network.
11
6. I/F terminals
7. Power switch
8. Power cord terminals
9. LAN connector
6. I/F terminals
7. Power switch
8. Power cord terminals
9. LAN connector
Description and Function